联想黑苹果怎么设置成第一启动项 (联想昭阳e43-80安装黑苹果)

原文来源于黑果魏叔官网,转载需注明出处。

联想昭阳e43-80安装黑苹果,联想昭阳笔记本安装黑苹果

硬件型号驱动情况

主板lenovo X380

处理器i7 8565U已驱动

内存32 GB ( 铭瑄 DDR4 2666MHz 16GB x 2 )已驱动

硬盘PM981(已更换970EVO)已驱动

显卡UHD620已驱动

声卡瑞昱 @ 英特尔 High Definition Audio 控制器已驱动

网卡 瑞昱 Realtek Gaming 2.5GbE Family Controller / 华硕已驱动

无线网卡+蓝牙ax201

BIOS 设置

在安装macOS之前,必须正确配置bios。在安全菜单中,设置以下设置:

Security > Security Chip: must be Disabled

Memory Protection > Execution Prevention: must be Enabled

Virtualization > Intel Virtualization Technology: must be Enabled

Virtualization > Intel VT-d Feature: must be Enabled

Anti-Theft > Computrace -> Current Setting: must be Disabled

Secure Boot > Secure Boot: must be Disabled

Intel SGX -> Intel SGX Control: must be Disabled

Device Guard: must be Disabled

在启动菜单中,设置以下选项:

UEFI/Legacy Boot: UEFI Only

CSM Support: No

在Thunderbolt菜单中,设定以下选项:

Thunderbolt BIOS Assist Mode: UEFI Only

Wake by Thunderbolt(TM) 3: No

Security Level: No

Support in Pre Boot Environment > Thunderbolt(TM) device: No

成功驱动功能:

1、声音可用

2、亮度可调

3、WiFi可用

4、触控板可用

5、摄像头可用

6、USB可用

7、触控屏幕