此文 威尔顿气动隔膜泵 挖掘了史上很全的气动隔膜泵设备的所有型号、基本参数、应用范围、膜片专属配件，东晟密封件告诉您以及 威尔顿气动隔膜泵 专属进口PTFE气动隔膜泵膜片密封件的材料选择造型和更换、维护保养故障处理资料分享！
威尔顿气动隔膜泵是一种以气压为动力，通过隔膜泵腔内的膜片来实现吸入和排出液体的泵。膜片是威尔顿气动隔膜泵的核心部件之一，它的质量和性能直接关系到泵的使用寿命和泵的工作效率。因此，选择合适的膜片材料和正确的维护保养方法对于威尔顿气动隔膜泵的使用非常重要。
一、膜片材料的选择
威尔顿气动隔膜泵膜片 材料一般有聚四氟乙烯、氯丁橡胶、氟橡胶等几种。不同的材料有不同的优缺点，需要根据具体情况选择。
1. 聚四氟乙烯膜片 密封件
聚四氟乙烯膜片具有优异的耐腐蚀性、耐高温性、耐磨损性和耐老化性，可以在 -20 ℃至 150 ℃的范围内使用。由于聚四氟乙烯的化学稳定性很高，因此可以在处理腐蚀性液体和高温液体时使用。但是，聚四氟乙烯膜片的弹性较差，容易变形和破裂，且价格较高。
2. 氯丁橡胶膜片 密封件
氯丁橡胶膜片具有良好的耐油性、耐磨性、耐老化性和耐热性，在 -30 ℃至 100 ℃的范围内使用。氯丁橡胶膜片弹性好，不易变形，价格相对较低。但是，氯丁橡胶膜片在处理高浓度酸、碱、溶剂等强腐蚀性介质时容易老化，使用寿命较短。
3. 氟橡胶膜片 密封件
氟橡胶膜片具有良好的耐腐蚀性、耐高温性、耐磨损性和耐老化性，在 -20 ℃至 150 ℃的范围内使用。由于氟橡胶的化学稳定性很高，因此可以在处理腐蚀性液体和高温液体时使用。但是，氟橡胶膜片的弹性较差，容易变形和破裂，且价格较高。
因此，根据不同的介质和工况要求，选择合适的膜片材料是非常重要的。
二、膜片 密封件 的故障分析及处理方法
1. 老化
膜片老化是威尔顿气动隔膜泵常见的故障之一。随着膜片使用时间的增加，其弹性会逐渐降低，变硬变脆，容易破裂或变形。膜片老化的主要原因是氧化、光照、热、酸、碱等介质的侵蚀。
处理方法：定期更换膜片，避免使用过期或存放不当的膜片，同时保持泵的清洁和维护，避免介质对膜片的侵蚀。
2. 破裂
膜片 密封件 的破裂可能是由于介质的冲击或过载引起的。当介质的压力超过膜片所能承受的极限时，膜片就会破裂。
处理方法：定期检查膜片的状况，及时更换破损的膜片，避免介质过载或压力过高。
3. 变形
膜片 密封件 的变形可能是由于介质的温度或压力变化引起的。当介质的温度或压力超过膜片所能承受的极限时，膜片就会发生变形，从而影响泵的工作效率。
处理方法：避免介质温度或压力过高，选择合适的膜片材料，定期检查膜片的状况，及时更换变形的膜片。
三、膜片的生产工艺和质量控制
威尔顿气动隔膜泵膜片 密封件 生产工艺和质量控制非常重要，直接关系到产品的质量和性能。
1. 材料采购
威尔顿气动隔膜泵的膜片生产需要采购优质的原材料，如聚四氟乙烯、氯丁橡胶、氟橡胶等。在采购过程中，需要对材料进行严格的检验和评估，确保材料的质量符合产品的要求。
2. 生产工艺控制
在膜片的生产过程中，需要控制各个环节的工艺参数，如温度、压力、时间等，以确保产品的一致性和稳定性。同时，需要对每个生产批次进行质量检查和测试，确保产品符合相关标准和要求。
3. 产品检验
威尔顿气动隔膜泵膜片 密封件 需要进行严格的产品检验和测试，包括外观检查、尺寸检查、弹性测试、压力测试等。只有通过严格的产品检验和测试，才能确保产品的质量和性能。
四、膜片的维护保养技巧
1. 清洗
在泵的使用过程中，膜片 密封件 可能会受到介质的污染或沉积物的堆积，影响其使用寿命和工作效率。因此，需要定期清洗膜片，避免介质对膜片的侵蚀和污染。
2. 更换
膜片的使用寿命有限，一般需要定期更换。在更换膜片时，需要选择合适的膜片材料，并按照正确的安装方法进行更换，以确保产品的质量和性能。
3. 保养
威尔顿气动隔膜泵膜片 密封件 需要定期进行保养，如涂抹防腐剂、加油、检查密封等。定期保养可以延长膜片的使用寿命和泵的工作效率。
总之，威尔顿气动隔膜泵的膜片是该泵的核心部件之一，选择合适的材料、正确的维护保养方法和严格的 。
五 、 威尔顿气动隔膜泵 所有型号表
型号： P025 最大流量： 19.3 LPM 最大压力： 8.6 bar 应用范围：低流量、低压力的应用，如化学品喷涂、印刷、清洗等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P025 最大流量： 19.3 LPM 最大压力： 8.6 bar 应用范围：低流量、低压力的应用，如化学品喷涂、印刷、清洗等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P050 最大流量： 49.2 LPM 最大压力： 8.6 bar 应用范围：中等流量、中等压力的应用，如化学品输送、污水处理、食品加工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P050 最大流量： 49.2 LPM 最大压力： 8.6 bar 应用范围：中等流量、中等压力的应用，如化学品输送、污水处理、食品加工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P050 最大流量： 49.2 LPM 最大压力： 8.6 bar 应用范围：中等流量、中等压力的应用，如化学品输送、污水处理、食品加工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX80 最大流量： 152 LPM 最大压力： 8.6 bar 应用范围：高流量、中等压力的应用，如化学品输送、污水处理、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P100 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：高流量、高压力的应用，如矿物浆输送、化学品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P400 最大流量： 1665 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX400 最大流量： 3330 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX400 最大流量： 3330 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX800 最大流量： 6240 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX800 最大流量： 6240 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX1500 最大流量： 12496 LPM 最大压力： 8.6 bar 应用范围：极高流量、中等压力的应用，如化学品输送、食品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX1500 最大流量： 12496 LPM 最大压力： 8.6 bar 应用范围：极高流量、中等压力的应用，如化学品输送、食品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX2000 最大流量： 20834 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P4000 最大流量： 41667 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P4000 最大流量： 41667 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力的应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P025 最大流量： 76 LPM 最大压力： 8.6 bar 应用范围：低流量、低压力应用，如实验室、化学品输送等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX025 最大流量： 152 LPM 最大压力： 8.6 bar 应用范围：低流量、低压力应用，如实验室、化学品输送等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P050 最大流量： 151 LPM 最大压力： 8.6 bar 应用范围：中等流量、低压力应用，如食品加工、印染、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX050 最大流量： 303 LPM 最大压力： 8.6 bar 应用范围：中等流量、低压力应用，如食品加工、印染、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX050 最大流量： 303 LPM 最大压力： 8.6 bar 应用范围：中等流量、低压力应用，如食品加工、印染、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX100 最大流量： 566 LPM 最大压力： 8.6 bar 应用范围：中等流量、中等压力应用，如化工、石油化工、食品加工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX100 最大流量： 566 LPM 最大压力： 8.6 bar 应用范围：中等流量、中等压力应用，如化工、石油化工、食品加工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX200 最大流量： 1132 LPM 最大压力： 8.6 bar 应用范围：高流量、中等压力应用，如化学品输送、污水处理、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P400 最大流量： 1132 LPM 最大压力： 8.6 bar 应用范围：高流量、中等压力应用，如化学品输送、污水处理、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P400 最大流量： 1132 LPM 最大压力： 8.6 bar 应用范围：高流量、中等压力应用，如化学品输送、污水处理、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P800 最大流量： 2265 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P800 最大流量： 2265 LPM 最大压力： 8.6 bar 应用范围：超高流量、中等压力应用，如石油化工、水泥制造、污水处理等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： P1500 最大流量： 4530 LPM 最大压力： 8.6 bar 应用范围：极高流量、中等压力应用，如化学品输送、食品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
型号： PX1500 最大流量： 9060 LPM 最大压力： 8.6 bar 应用范围：极高流量、中等压力应用，如化学品输送、食品加工、石油化工等。 膜片配件 ：进口 PTFE 气动隔膜泵膜片密封件
Wilton pneumatic diaphragm pump is a type of pump that is powered by air pressure and uses the diaphragm inside the diaphragm pump chamber to suction and discharge liquids. The diaphragm is one of the core components of the Wilton pneumatic diaphragm pump, and its quality and performance are directly related to the pump's service life and work efficiency. Therefore, selecting appropriate diaphragm materials and correct maintenance methods is crucial for the use of Wilton pneumatic diaphragm pumps.
1 、 Selection of Diaphragm Materials
The diaphragm materials of Wilton pneumatic diaphragm pumps generally include polytetrafluoroethylene, chloroprene rubber, fluororubber, and other types. Different materials have different advantages and disadvantages, which need to be selected according to specific situations.
1. PTFE membrane
PTFE membranes have excellent corrosion resistance, high temperature resistance, wear resistance, and aging resistance, and can be used in the range of -20 ℃ to 150 ℃ . Because of its high chemical stability, polytetrafluoroethylene can be used to treat corrosive liquids and high-temperature liquids. However, polytetrafluoroethylene membranes have poor elasticity, are prone to deformation and rupture, and are more expensive.
2. Neoprene diaphragm
Neoprene rubber membranes have good oil resistance, wear resistance, aging resistance, and heat resistance, and can be used in the range of -30 ℃ to 100 ℃ . Neoprene rubber membranes have good elasticity, are not easily deformed, and are relatively inexpensive. However, chloroprene rubber membranes are prone to aging and have a shorter service life when dealing with highly corrosive media such as high concentrations of acids, alkalis, and solvents.
3. Fluorine rubber diaphragm
Fluorine rubber membranes have good corrosion resistance, high temperature resistance, wear resistance, and aging resistance, and can be used in the range of -20 ℃ to 150 ℃ . Due to the high chemical stability of fluororubber, it can be used in the treatment of corrosive liquids and high-temperature liquids. However, fluororubber membranes have poor elasticity, are prone to deformation and rupture, and are more expensive.
Therefore, it is very important to choose appropriate membrane materials based on different media and operating conditions.
2 、 Fault Analysis and Handling Methods of Diaphragm
1. Aging
Diaphragm aging is one of the common faults in Wilton pneumatic diaphragm pumps. As the usage time of the membrane increases, its elasticity will gradually decrease, become hard and brittle, and it is easy to crack or deform. The main reason for membrane aging is the erosion of media such as oxidation, light, heat, acid, and alkali.
Treatment method: Regularly replace the diaphragm, avoid using expired or improperly stored diaphragms, and keep the pump clean and maintained to avoid medium erosion of the diaphragm.
2. Rupture
The rupture of the diaphragm may be caused by the impact or overload of the medium. When the pressure of the medium exceeds the limit that the diaphragm can withstand, the diaphragm will rupture.
Solution: Regularly check the condition of the membrane, replace damaged membranes in a timely manner, and avoid medium overload or high pressure.
3. Deformation
The deformation of the diaphragm may be caused by changes in temperature or pressure of the medium. When the temperature or pressure of the medium exceeds the limit that the diaphragm can withstand, the diaphragm will deform, thereby affecting the working efficiency of the pump.
Solution: Avoid excessive medium temperature or pressure, choose suitable diaphragm materials, regularly check the condition of the diaphragm, and replace deformed diaphragms in a timely manner.
3 、 Production process and quality control of membranes
The diaphragm production process and quality control of Wilton pneumatic diaphragm pump are very important, directly related to the quality and performance of the product.
1. Material procurement
The production of membranes for Wilton pneumatic diaphragm pumps requires the procurement of high-quality raw materials, such as polytetrafluoroethylene, chloroprene rubber, fluororubber, etc. During the procurement process, strict inspection and evaluation of materials are required to ensure that their quality meets the requirements of the product.
2. Production process control
In the production process of the diaphragm, it is necessary to control the process parameters of various links, such as temperature, pressure, time, etc., to ensure the consistency and stability of the product. At the same time, quality inspection and testing are required for each production batch to ensure that the product meets relevant standards and requirements.
3. Product inspection
The diaphragm of Wilton pneumatic diaphragm pump requires strict product inspection and testing, including appearance inspection, dimensional inspection, elasticity testing, pressure testing, etc. Only through strict product inspection and testing can the quality and performance of the product be ensured.
4 、 Maintenance Techniques for Diaphragms
1. Cleaning
During the use of the pump, the diaphragm may be contaminated by the medium or accumulate sediment, affecting its service life and work efficiency. Therefore, it is necessary to regularly clean the membrane to avoid medium erosion and contamination of the membrane.
2. Replacement
The service life of the diaphragm is limited and generally requires regular replacement. When replacing the diaphragm, it is necessary to choose the appropriate diaphragm material and follow the correct installation method to ensure the quality and performance of the product.
3. Maintenance
The diaphragm of Wilton pneumatic diaphragm pump needs regular maintenance, such as applying anti-corrosion agents, adding oil, and checking the sealing. Regular maintenance can extend the service life of the diaphragm and the efficiency of the pump.
In short, the diaphragm of the Wilton pneumatic diaphragm pump is one of the core components of the pump, and the selection of appropriate materials, correct maintenance methods, and strict The following table content:
l P025
Maximum flow rate: 19.3 LPM
Maximum pressure: 8.6 bar
Application scope: Low flow and low pressure applications, such as chemical spraying, printing, cleaning, etc.
l PX25
Maximum flow rate: 38.6 LPM
Maximum pressure: 8.6 bar
Application scope: Low flow and low pressure applications, such as chemical spraying, printing, cleaning, etc.
l P050
Maximum flow rate: 49.2 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow and medium pressure applications, such as chemical transportation, sewage treatment, food processing, etc.
l PX50
Maximum flow rate: 98.4 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow and medium pressure applications, such as chemical transportation, sewage treatment, food processing, etc.
l P080
Maximum flow rate: 76 LPM
Maximum pressure: 8.6 bar
Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l PX80
Maximum flow rate: 152 LPM
Maximum pressure: 8.6 bar
Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l P100
Maximum flow rate: 151 LPM
Maximum pressure: 8.6 bar
Application scope: High flow and high pressure applications, such as mineral slurry transportation, chemical processing, petrochemical industry, etc.
l PX100
Maximum flow rate: 302 LPM
Maximum pressure: 8.6 bar
Application scope: High flow and high pressure applications, such as mineral slurry transportation, chemical processing, petrochemical industry, etc.
l P150
Maximum flow rate: 416 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l PX150
Maximum flow rate: 832 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l P200
Maximum flow rate: 834 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l PX200
Maximum flow rate: 1668 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l P400
Maximum flow rate: 1665 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l PX400
Maximum flow rate: 3330 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l P800
Maximum flow rate: 3120 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l PX800
Maximum flow rate: 6240 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l P1500
Maximum flow rate: 6248 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l PX1500
Maximum flow rate: 12496 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.
l P2000
Maximum flow rate: 10417 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l PX2000
Maximum flow rate: 20834 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l P4000
Maximum flow rate: 41667 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l PX4000
Maximum flow rate: 83334 LPM
Maximum pressure: 8.6 bar
Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.
l P025
Maximum flow rate: 76 LPM
Maximum pressure: 8.6 bar
Application scope: Low flow, low pressure applications, such as laboratory, chemical transportation, etc.
l PX025
Maximum flow rate: 152 LPM
Maximum pressure: 8.6 bar
Application scope: Low flow, low pressure applications, such as laboratory, chemical transportation, etc.
l P050
Maximum flow rate: 151 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow, low pressure applications, such as food processing, printing and dyeing, petrochemical industry, etc.
l PX050
Maximum flow rate: 303 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow, low pressure applications, such as food processing, printing and dyeing, petrochemical industry, etc.
l P100
Maximum flow rate: 283 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow, medium pressure applications, such as chemical, petrochemical, food processing, etc.
l PX100
Maximum flow rate: 566 LPM
Maximum pressure: 8.6 bar
Application scope: Medium flow, medium pressure applications, such as chemical, petrochemical, food processing, etc.
l P200
Maximum flow rate: 566 LPM
Maximum pressure: 8.6 bar
Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l PX200
Maximum flow rate: 1132 LPM
Maximum pressure: 8.6 bar
Aplication scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l P400
Maximum flow rate: 1132 LPM
Maximum pressure: 8.6 bar
Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l PX400
Maximum flow rate: 2265 LPM
Maximum pressure: 8.6 bar
Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.
l P800
Maximum flow rate: 2265 LPM
Maximum pressure: 8.6 bar
Application scope: Ultra high flow, medium pressure applications, such as petrochemical, cement manufacturing, sewage treatment, etc.
l PX800
Maximum flow rate: 4530 LPM
Maximum pressure: 8.6 bar
Application scope: Ultra high flow, medium pressure applications, such as petrochemical, cement manufacturing, sewage treatment, etc.
l P1500
Maximum flow rate: 4530 LPM
Maximum pressure: 8.6 bar
Application scope: High flow rate, medium pressure applications, such as chemical transportation, food processing, petrochemical industry, etc.
l PX1500
Maximum flow rate: 9060 LPM
Maximum pressure: 8.6 bar
Application scope: High flow rate, medium pressure applications, such as chemical transportation, food processing, petrochemical industry, etc.
威尔顿气动隔膜泵 ， 型号清单，膜片，隔膜， 气动隔膜泵 膜片